USMC Ultra-Light Tactical Vehicle (ULTV) Practice Test

These questions are part of the practice quiz. Start practicing

• A throttle reading of 1.5 corresponds to which speed?
• How are ULTV fault codes diagnosed and addressed?
• What practice helps prevent fuel contamination in field operations?
• What should you verify about ULTV tires prior to operation?
• What is the mileage note associated with the spare wheel pressure?
• Which of the following is NOT a listed fuel type for the ULTV?
• What is the maximum speed on hard surfaces?
• Which input corresponds to 25 mph?
• If a defect is found during PMCS, what is the proper action?
• A throttle reading of 2.5 corresponds to which speed?
• How should you handle hills and gradients to maintain control and prevent rollovers?
• What is the engine horsepower value for the ULTV?
• Which term describes tire movement downward due to rebound?
• How does the ULTV cooling system operate and what are key maintenance checks?
• Which item should be included in after-action notes for ULTV missions?
• What does jounce refer to?
• What GVW corresponds to MIRE Level 1?
• What unit is used for GVW values in the data?
• What are the approved methods for securing cargo and equipment in the ULTV?
• Which elements should be captured during an after-action review?
• If the throttle indicator displays 0.5, what speed is indicated?
• When approaching a steep descent on uneven terrain, what is recommended?
• Which components should be checked when servicing the cooling system?
• What are the key considerations when towing or towing a trailer with the ULTV?
• During PMCS, what tire-related checks are typically recorded?
• What are the engine horsepower and torque values for the ULTV?
• If the curb weight is 3078 lbs and gross vehicle weight is 4878 lbs, what is the payload capacity?
• What steps should be taken to diagnose electrical faults in the ULTV?
• What is the maximum speed the vehicle can tow or be towed?
• Which activity is part of post-use PMCS for the ULTV?
• How should convoy communications be maintained when operating the ULTV in a group?
• Which gear range corresponds to the automatic transmission?
• What are the ULTV electrical system maintenance principles related to battery and alternator?
• Which speed is the slowest?
• Which precautions apply to ULTV operation in cold weather?
• What is the length and color of the winch rope?
• What is the usable length of rope?
• Which statement accurately describes the winch system's specification?
• What are the ULTV water fording guidelines and hazards?
• What is the gross vehicle weight of the ULTV?
• Which statement best describes how to treat safety devices and the parking brake during PMCS?
• Which input corresponds to 25 mph?
• Which option lists a valid diesel fuel type for the ULTV?
• Which pair correctly matches the ULTV's payload and tow capacity?
• What is the maximum speed for Cross country, littered patients, and towing?
• How often should ULTV maintenance be performed and logged?
• What drive modes are available on the ULTV and when should they be used?
• What is the payload capacity of the ULTV?
• What does ROPS stand for on the ULTV?
• Which statement best promotes safety regarding seating and restraints inside the ULTV?
• Besides coolant level, which cooling system component should be inspected during maintenance?
• What are common symptoms of a failing ULTV cooling system?
• What is the reported fuel economy?
• Which speed is the fastest?
• CFNon2 corresponds to which action?
• A throttle reading greater than 4 corresponds to which speed?
• Which approach supports safety in a tactical convoy for the ULTV?
• Which item should accompany ULTV missions and maintenance?
• What is the maximum speed on Rocky/uneven terrain towing?
• What is the flat towable distance?
• Which acronym stands for Basic Issue Items?
• The ULTV accelerates from 0 to 30 mph in 5 seconds. What is the approximate acceleration in mph per second?
• Which hand signal indicates Stop?
• Which statement correctly compares the curb weight and gross vehicle weight of the ULTV?
• When and how should recovery procedures be performed with the ULTV?
• What is the spare wheel pressure?
• Which action is part of inspecting the ULTV braking system during PMCS?
• Which system provides protection during rollover events on the ULTV?
• What is the average of the front and rear tire pressures?
• After addressing a fault code, what is the recommended final step?
• Which term represents a directional instruction in the control options?
• What is the engine torque of the ULTV?
• Which action helps detect excessive play in the ULTV steering system?
• How should you respond to a vehicle system warning while in the field?
• If the vehicle is traveling at 25 mph, which input was used?
• Which signaling gesture corresponds to Reverse?
• What is the correct starting sequence for the ULTV engine?
• Which item among the following is Basic Issue Items?
• What hand signals or ground guides are used with ULTV operations in restricted spaces?
• If abnormal readings are detected on the ULTV, what action should be taken?
• What is the winch capacity?
• What is the purpose of edge protection and padding when cargo is secured in ULTV?
• Which instrument cluster reading indicates a potential engine problem?
• Which gear range corresponds to the manual transmission?
• What should be included when documenting maintenance actions for the ULTV?
• What is the normal vertical step height for the ULTV?
• If throttle reads 0.5, which speed is indicated?
• Which speed is associated with Trails?
• Which of the following is NOT a correct data pairing?
• Which describes the ULTV's fuel system?
• What is the ULTV's top speed?
• What is the ULTV's typical payload capacity and how should payload be distributed?
• What is the vehicle curb weight of the ULTV?
• What is the driveline configuration?
• What is the front brake type?
• What is the ULTV's oil capacity and specification?
• What steps should be taken if ULTV items become dislodged during movement?
• What is the left turning radius of the ULTV?
• What is the most complete practice for securing ULTV cargo containing weapons or sensitive equipment during operation?
• In hot, dusty environments, which practice supports operator safety and performance?
• Which acronym describes Brake Throttle Modulations?
• What safety considerations are required when refueling or handling fuels around the ULTV?
• Which option describes the ULTV's incline/decline performance at the given speeds?
• Rear brakes are described as what type?
• What types of records and checks should be signed off during PMCS?
• Which item is commonly included in PMCS/maintenance documentation for the ULTV?
• Which option describes the driveline of the vehicle?
• What are the essential steps of a ULTV PMCS (Pre-Operational Checks and Servicing)?
• What security features or procedures help prevent ULTV theft or unauthorized use?
• How many litters can the ULTV carry?
• Which situation should trigger use of 4WD mode?
• Which input corresponds to 5 mph?
• What radio and communication readiness checks are required before deployment?
• What are the key steering and braking considerations when operating the ULTV on challenging terrain?
• What is the primary purpose of anti-rattle devices when securing cargo in the ULTV?
• How does the ULTV suspension and ground clearance affect cargo stability?
• What is the ULTV's tow capacity?
• Which lighting and signaling must be functional on ULTV for safe operation?
• What is the vehicle height when the ROPS is down?
• Which action is part of POST-operation actions for the ULTV?
• Which input yields 5 mph?
• What is the fording depth of the ULTV at 5 mph?
• Which off-road technique improves ULTV performance on uneven terrain?
• How should payload distribution influence ULTV stability and rollover risk?
• Which of the following is listed as a tire failure symptom?
• What is the recommended tire pressure for the front wheels?
• Which speed is associated with Gravel surfaces?
• If the winch rope is 50 ft long, what is the usable length of rope?
• What does rebound refer to in tire movement?
• Which term describes tire movement upward?
• BTM stands for which of the following?
• What is the gas range at 30 mph and Gross Vehicle Weight?
• Which input corresponds to 15 mph?
• Which signaling gesture indicates Forward?
• In the event of a small fire, what is the recommended action?
• Which ORM step applies to ULTV mission planning?
• What steps should be taken to re-tension load securement after loading if movement is imminent?
• Which input maps to 15 mph?
• What is the Winch Rest Period?
• Why is logging faults during PMCS important?
• How should the ULTV's electrical systems be checked for readiness?
• What is the recommended tire pressure for the rear wheels?
• Which action best promotes proper seating ergonomics inside the ULTV?
• Which input corresponds to 45 mph?
• What is the maximum side slope the ULTV can handle?
• Which specification describes the ULTV's incline/decline capability?
• In hot, dusty environments, which measures should be taken?
• Which option best identifies a tire-related symptom?
• If depth or current exceeds ULTV specifications, what should you do?
• What is the maximum speed on Gravel surfaces?
• What is the ULTV's fuel capacity in gallons?
• What fuel considerations apply to ULTV operation in the field?
• What is the GVW for MIRE Level 2?
• Which signaling gesture corresponds to a Right signal?
• How is Winch In performed?
• What is the 0-30 mph time for the ULTV?
• Which PPE and hazard awareness practices are required before operating the ULTV?
• Which statement about the winch system is accurate?
• How many types of recoveries are listed?
• What is the primary mission profile of the USMC Ultra-Light Tactical Vehicle (ULTV)?
• How should the ULTV transmission be operated to maximize reliability in field conditions?
• What is the GVW for MIRE Level 3?
• Which value is associated with the GVW listed for MIRE Level 1?
• How should you prepare for a ULTV mission debrief or after-action review?
• Which general guidelines inform ULTV speed and stability on varied terrain?
• How is Winch Out performed?
• BII stands for which of the following?
• Which statement is true about the turning radii of the ULTV?
• Which turning radius is greater on the ULTV: right or left?
• How do you stop the winch?
• What is the maximum speed on Trails?
• What are the ride height leveling values?
• Which statement best describes engine warm-up after starting ULTV?
• What is the numeric value of the fuel economy?
• Which indicators and gauges are considered critical to monitor during ULTV operation?
• Which signaling gesture corresponds to a Left signal?
• Which measure addresses dust, dirt, and environmental exposure during ULTV operations?
• During PMCS, which items should be verified on the ULTV for electrical readiness?
• What are the critical emergency procedures for a ULTV fire or rollover?
• Which of the following is a valid recovery type listed?